2010 Chrysler Town & Country Add Keys using Autel IM608

Autel MaxiIM IM608 did successfully pull the pin on a 2006 Dodge and I’m gonna show another 2010 Chrysler Town and Country.

Auto detect.


			2010 Chrysler Town & Country Add Keys using Autel IM608


Auto scan VIN.

Chrysler (USA).


			2010 Chrysler Town & Country Add Keys using Autel IM608

Diagnostic program loading.

Smart Mode.


			2010 Chrysler Town & Country Add Keys using Autel IM608

Read the message.


			2010 Chrysler Town & Country Add Keys using Autel IM608


Establishing vehicle communication.

Select “Smart Key”.


			2010 Chrysler Town & Country Add Keys using Autel IM608

Switch the ignition OFF and then ON again, make sure the engine is off.


			2010 Chrysler Town & Country Add Keys using Autel IM608

Establishing vehicle communication.

The password is 3679.


			2010 Chrysler Town & Country Add Keys using Autel IM608

Select “Read Immobilizer Password (CAN)”.


			2010 Chrysler Town & Country Add Keys using Autel IM608

Go to “Key Learning” again.

Tap “OK”

Establishing vehicle communication.


			2010 Chrysler Town & Country Add Keys using Autel IM608


			2010 Chrysler Town & Country Add Keys using Autel IM608

Learning failed.

I guess I should have the new key there.


			2010 Chrysler Town & Country Add Keys using Autel IM608

Turn the ignition off and pull out the current key. Insert another key to be programmed, turn the ignition on, and make sure the engine has not been started.


			2010 Chrysler Town & Country Add Keys using Autel IM608

Establishing vehicle communication.

Current number of keys is: 3

Learning successful.


			2010 Chrysler Town & Country Add Keys using Autel IM608

I don’t want to learn the next key, let’s see if it works.


			2010 Chrysler Town & Country Add Keys using Autel IM608

This is the new key, and I press the “Unlock button” it can start the car, nice.


			2010 Chrysler Town & Country Add Keys using Autel IM608

This is the old key.


			2010 Chrysler Town & Country Add Keys using Autel IM608

So. Success. As you can see, you did not need to connect the programmer, you can directly connect Autel IM608 to the Chrysler via OBD.