Program Paramera New Key via VVDI2 and VVDI Prog

It’s a good tutorial of Porsche Paramera key programming using VVDI Prog to read BCM and VVDI2 to program a new key.

Porsche BCM:


			Program Paramera New Key via VVDI2 and VVDI Prog

Tools needed:

VVDI PROG programmer

VVDI2 key programmer

(both made by the Xhorse)

Two main steps of Paramera key programming:


  1. Read BCM data
  2. Program a dealer key

III. Write the key

3 steps for making a new key to Paramera… Here you go.

Step 1 VVDI Prog read BCM

Disassemble the BCM

Find out the mc9s12xd512vag chip


			Program Paramera New Key via VVDI2 and VVDI Prog


			Program Paramera New Key via VVDI2 and VVDI Prog

Run VVDI Prog software

Select type: 4-immobilizer, brand: porsche, type: BCM-1L15Y


			Program Paramera New Key via VVDI2 and VVDI Prog

Click on Connection Diagram

Connect the MC9S12 adapter to the BCM


			Program Paramera New Key via VVDI2 and VVDI Prog

Remove the component and solder back after the operation is complete


			Program Paramera New Key via VVDI2 and VVDI Prog

Read BCM data


			Program Paramera New Key via VVDI2 and VVDI Prog

Then save the bin file


			Program Paramera New Key via VVDI2 and VVDI Prog

Step 2 Xhorse VVDI2 Key Programmer Porsche prepare dealer key

Open VVDI 2 Quick Start

Go to vvdi porsche


			Program Paramera New Key via VVDI2 and VVDI Prog

Select Key Learn-> new porsche key->prepare dealer key-> EEPROM 01L15Y


			Program Paramera New Key via VVDI2 and VVDI Prog

Load file: open the bin file (read by vvdi prog)


			Program Paramera New Key via VVDI2 and VVDI Prog


Select key 3


			Program Paramera New Key via VVDI2 and VVDI Prog

Prepare dealer key


			Program Paramera New Key via VVDI2 and VVDI Prog

Click on OK to save the new EEPROM dump file


			Program Paramera New Key via VVDI2 and VVDI Prog

Add dealer key successfully! Please learn the new dealer key via OBDII or flash the new file to the car. If you want to add a new key, please use the new save file!


			Program Paramera New Key via VVDI2 and VVDI Prog

Step 3 VVDI programmer add a new key

Back to VVDI-Prog ecu programmer

Open the new bin file


			Program Paramera New Key via VVDI2 and VVDI Prog

Write…


			Program Paramera New Key via VVDI2 and VVDI Prog

Operation success!


			Program Paramera New Key via VVDI2 and VVDI Prog

Done!


			Program Paramera New Key via VVDI2 and VVDI Prog

See also “VVDI Prog & VVDI2 Program A New Key to Porsche Paramera “