Program Renault Megane III 09-15 Key Card with Autel MaxiIM IM608

How-to: add a spare remote key card to Renault Megane III year 2009 to 2015 by using Autel MaxiIM IM608 key programmer. No doubt the smartest investment for your workshop.

Tools needed:

IM608 tablet


2 key cards, original key card and blank key card

Enable network connection (required when reading password)


			Program Renault Megane III 09-15 Key Card with Autel MaxiIM IM608


			Program Renault Megane III 09-15 Key Card with Autel MaxiIM IM608

Original key can start engine


			Program Renault Megane III 09-15 Key Card with Autel MaxiIM IM608

New blank key cannot start engine

Insert original key card into card slot and turn on ignition switch

In Autel IM608, Select IMMO function->Manual selection->Renault->Megane III->2009-2015-> Keyless System (CAN)->Key learning->Learn the key


			Program Renault Megane III 09-15 Key Card with Autel MaxiIM IM608


			Program Renault Megane III 09-15 Key Card with Autel MaxiIM IM608


			Program Renault Megane III 09-15 Key Card with Autel MaxiIM IM608


			Program Renault Megane III 09-15 Key Card with Autel MaxiIM IM608

Both 2 keys need to be learnt


			Program Renault Megane III 09-15 Key Card with Autel MaxiIM IM608

Remove key card from slot and turn off ignition

Push START/STOP button to wake up car activity if in sleep mode.
Press OK to start key programming


			Program Renault Megane III 09-15 Key Card with Autel MaxiIM IM608

Reading password in progress


			Program Renault Megane III 09-15 Key Card with Autel MaxiIM IM608

Make sure network is enabled


			Program Renault Megane III 09-15 Key Card with Autel MaxiIM IM608

Note:

1.No data is programmed to card in next step

2. Max 2 blank card can be presented for programming (4 cards in total)

3.Blank card that was not presented during next step, will not be accepted during learning step.


			Program Renault Megane III 09-15 Key Card with Autel MaxiIM IM608

Insert next key card and press READ button to read card information

Press Next to continue

Remove card


			Program Renault Megane III 09-15 Key Card with Autel MaxiIM IM608

Insert card (original key card) fully to the card reader slot and then press OK

Programming card in process


			Program Renault Megane III 09-15 Key Card with Autel MaxiIM IM608

Program key card success. Press Yes to program next key card

Remove 1st key card and insert 2nd one

Follow same steps to program 2nd key card until success


			Program Renault Megane III 09-15 Key Card with Autel MaxiIM IM608

Remove card and disconnect Autel MaxiIM IM608 key programmer

Test remote control and start engine with the new key card.



			Program Renault Megane III 09-15 Key Card with Autel MaxiIM IM608

Both key works.

www.obdii365.com