Yanhua Mini ACDP Adds Smart Key to VW MQB without Soldering

Yanhua Mini ACDP adds VW MQB module and PCF key adapter which enables MQB key programming without soldering.

Demonstrating MQB key learning on bench:

Step 1: Read EEPROM & IMMO data


			Yanhua Mini ACDP Adds Smart Key to VW MQB without Soldering

Select VW module->MQB Platform instrument->Instrument with NEC35XX (Continental/VDO)->IMMO->Auto mode
(Note: Only Continental and VDO MQB dashboard are supported )


			Yanhua Mini ACDP Adds Smart Key to VW MQB without Soldering


			Yanhua Mini ACDP Adds Smart Key to VW MQB without Soldering


			Yanhua Mini ACDP Adds Smart Key to VW MQB without Soldering


			Yanhua Mini ACDP Adds Smart Key to VW MQB without Soldering


			Yanhua Mini ACDP Adds Smart Key to VW MQB without Soldering

Connect the Yanhua ACDP host with vehicle OBD port and turn on the ignition switch.
If smart key, put the key close to the steering column emergency start coil.


			Yanhua Mini ACDP Adds Smart Key to VW MQB without Soldering

Check VIN and other information


			Yanhua Mini ACDP Adds Smart Key to VW MQB without Soldering


Reading EEPROM and IMMO data


			Yanhua Mini ACDP Adds Smart Key to VW MQB without Soldering

The dashboard turns black during reading procedure, it is normal.
It will auto reset instrument later.


			Yanhua Mini ACDP Adds Smart Key to VW MQB without Soldering

Read and save EEPROM data automatically


			Yanhua Mini ACDP Adds Smart Key to VW MQB without Soldering

Read and save IMMO data automatically

Step 2: Write key
Yanhua mini ACDP will detect vehicle VIN, CS, PIN and key number


			Yanhua Mini ACDP Adds Smart Key to VW MQB without Soldering

Insert the PCF key adapter


			Yanhua Mini ACDP Adds Smart Key to VW MQB without Soldering

1.The key must be a smart key.
2.Keys generated with the original key cannot be replaced anti-theft lock online.
Put the working key into the PCF KEY adapter induction coil and press OK to continue


			Yanhua Mini ACDP Adds Smart Key to VW MQB without Soldering

Read the working key successfully. Put a blank smart key into PCF adapter


			Yanhua Mini ACDP Adds Smart Key to VW MQB without Soldering


			Yanhua Mini ACDP Adds Smart Key to VW MQB without Soldering

Writing immo…


			Yanhua Mini ACDP Adds Smart Key to VW MQB without Soldering

The key was generated successfully. Press Continue to learn the key to vehicle.

Step 3: Learn key
1.Don’t disconnect the instrument power supply or switch the electric door dutriun key learning process.
2.If fail to learn key. Do key learning again. Put the smart key close to the steering column emergency start coil and click OK to continue.


			Yanhua Mini ACDP Adds Smart Key to VW MQB without Soldering

Select the number of keys need to learn and load immo
Both keys need to learn, select key number: 2


			Yanhua Mini ACDP Adds Smart Key to VW MQB without Soldering

If dash shows 1-2, 1st key learn success


			Yanhua Mini ACDP Adds Smart Key to VW MQB without Soldering

Insert 2nd key and learn key


			Yanhua Mini ACDP Adds Smart Key to VW MQB without Soldering

If see 2-2, 2nd key learn success
Key learning success.



			Yanhua Mini ACDP Adds Smart Key to VW MQB without Soldering

Yanhua mini acdp will auto save new key data.

http://www.obdii365.com/producttags/yanhua-acdp.html

http://www.obdii365.com/service/yanhua-mini-acdp-program-key-for-vw-mqb-no-soldering-105170.html