Xhorse VVDI Key Tool Plus Program BMW CAS4 key Reviews

Test feedback: Xhorse VVDI Key Tool Plus is able to Generate a key via OBD for BMW CAS4.

Operation steps:

  1. Put the key into the coil and press the “start”button on the screen of BMW’s CAS4 test platform.

Notice: without putting the key in the coil, the blue light on the screen won’t be on if we click the “start” button. But if we put the original key into the coil, the blue light will be on. And this can demonstrate that the key is legitimate. Now, remove the key and put a new key into the coil. Click the “start” button, then the blue light won’t be on. Through this method, we can check whether the key is new or not.

  1. Click “Immo matching”>>“Europe”>>“BMW”>>“By system”>>“CAS4/CAS4+ immo system”>>“Key function”>>“Start”.


			Xhorse VVDI Key Tool Plus Program BMW CAS4 key Reviews


			Xhorse VVDI Key Tool Plus Program BMW CAS4 key Reviews


			Xhorse VVDI Key Tool Plus Program BMW CAS4 key Reviews


			Xhorse VVDI Key Tool Plus Program BMW CAS4 key Reviews


			Xhorse VVDI Key Tool Plus Program BMW CAS4 key Reviews


			Xhorse VVDI Key Tool Plus Program BMW CAS4 key Reviews

  1. Choose “Generate key via OBD”>>“Read key information”


			Xhorse VVDI Key Tool Plus Program BMW CAS4 key Reviews


			Xhorse VVDI Key Tool Plus Program BMW CAS4 key Reviews

  1. We’ve read out the key info., and click “OK”>>“OK” again>>“Preprocess CAS4/CAS4+”>>“Yes”>>click“Yes” to use quick mode.


			Xhorse VVDI Key Tool Plus Program BMW CAS4 key Reviews


			Xhorse VVDI Key Tool Plus Program BMW CAS4 key Reviews


			Xhorse VVDI Key Tool Plus Program BMW CAS4 key Reviews

  1. After reading the code, the system prompts to save the code, click“Save the code”>>“OK”.


			Xhorse VVDI Key Tool Plus Program BMW CAS4 key Reviews

  1. Now, we’ll start to preprocess CAS4/CAS4+, and it will take about 2-3 minutes. In this case, it can be used as the key to BMW CAS4. There is no need to dissemble the CAS computer. And there is no need to use a programmer. We can operate with OBD directly.


			Xhorse VVDI Key Tool Plus Program BMW CAS4 key Reviews


  1. It’s writing the code now, click“OK”.


			Xhorse VVDI Key Tool Plus Program BMW CAS4 key Reviews



			Xhorse VVDI Key Tool Plus Program BMW CAS4 key Reviews

  1. Click “Generate the dealer key-use ignition switch”>>“Key 4”


			Xhorse VVDI Key Tool Plus Program BMW CAS4 key Reviews

  1. If your car is produced after 2012, click “yes”; if your car is produced before 2012, click “no”.


			Xhorse VVDI Key Tool Plus Program BMW CAS4 key Reviews

  1. Look at the light on the screen, the blue light is on. And it means that the ignition is on. Now, click “There’s a vehicle key, use the vehicle key to switch on the ignition, then click next step”>>“OK”


			Xhorse VVDI Key Tool Plus Program BMW CAS4 key Reviews

  1. Now, it’s reading the information of the original key to see if it can detect it. Now, the original key is detected. Click “OK”.


			Xhorse VVDI Key Tool Plus Program BMW CAS4 key Reviews


			Xhorse VVDI Key Tool Plus Program BMW CAS4 key Reviews

  1. Get rid of the old key and put the new key into the coil, then click “OK” again.

Notice: if we operate in the car, we need to attach the new key to the sensor switch which is next to the steering wheel of the car.

  1. We’ve detected the new key. Now, it shows key learning is finished, click “OK”.


			Xhorse VVDI Key Tool Plus Program BMW CAS4 key Reviews


			Xhorse VVDI Key Tool Plus Program BMW CAS4 key Reviews

Notice: when we operate in the car, the new key won’t be detected if you put it in the wrong place of the car. The new key will learn in the coil, just like in the reaction zone of the car, so we need to adjust the position.

  1. Now, click the “start” button on the screen of BMW’s CAS4 test platform, and we can see that the blue light is always on, which means that the new key has been learned.


			Xhorse VVDI Key Tool Plus Program BMW CAS4 key Reviews

XHORSE KEY TOOL PLUS Key Programmer booking welcome:
Whatsapp: +86 18259252285
Email: Sales@OBDII365.com
Skype: OBDII365.com