Program Audi A6L 4th IMMO Remote Key by OBDSTAR X300 DP

Program Audi A6L 4th IMMO Remote Key by OBDSTAR X300 DP
Rate this post

To Program Audi A6L 4th immobilizer remote key by OBDSTAR X300 DP key programmer, you need extra OBDSTAR RFID adapter (for VW AUDI SKODA SEAT 4th & 5th IMMO) to work with.


Step-by-step Guide:

1. Turn on ignition with dealer key and read out eeprom data thru 9S12DT256 for Audi A6L.

Select IMMO key programmer->VAG-> Audi

Select 4th generation immobilizer system

Select 9S12DT(G)128

Read EEPROM data (backup)

Turn ignition to ON position

Reading eeprom data

Save eeprom data

2. Generate CS code and PIN code from EEPROM data thru 9S12DT256.

3.Generate Dealer Key from the EEPROM data(Bin file) and do Key Data Learning with OBDSTAR RFID Adapter Chip Reader.

Connect RFID adpater with X300DP tablet

Insert the new key into OBDSTAR RFID Adapter

Make sure you have backup the eeprom data

Enter key numbers to be programmed (1-8)

Turn ignition to ON

Insert the key to be learned one by one and follow X300 DP prompt

After key learning done, test the new key to turn on the ignition.



Bundle package: OBDSTAR X300 DP+ OBDSTAR RFID adapter

Be the first to comment

Leave a Reply

Your email address will not be published.


This site uses Akismet to reduce spam. Learn how your comment data is processed.