How to Program Chevy Sonic 2014 Remote Key with SKP900



How to Program Chevy Sonic 2014 Remote Key with SKP900
Rate this post

Here’s the step by step instructions on how to program a remote head key for a 2014 Chevy Sonic using SuperOBD SKP900 auto key programmer.

4-button remote key

Connect SKP-900 host with vehicle via OBD diagnostic socket using main test cable

Turn ignition switch to ON position

Turn on skp900 v5.0

Select Immobilizer->Chevrolet->Immobilizer 2->New Structure->Loading…->IMMO System

Choose OBDII adapter and turn ignition off

SKP900 detect current number of key: 1


Select Program Key

Turn ignition on

SKP900 key programmer will require to enter 4-digit pin code to access

Manually enter pin and confirm

Programming, please wait for 10 minutes

Turn ignition off and add a new key

Open-close driver door, shut down all electronic equipment

Turn ignition on

Continue to program next key.

Turn ignition off and add extra key

Insert a new key and turn ignition on

Repeat procedure above until key programming is done


Programming succeed.

Test the remote key, working!

Note: SKP900 is out of production. You can choose other alternatives, Xtool X100 Pad2, OBDSTAR X300 DP or Lonsdor K518ISE key programmers.

1 Comment

  1. Hallo dear.

    Which tool do you have that can program Hummer H3 key onboard that you have tried, not just the function listed in the menu, but a function that have been successfully tested.

    Thanks in advance

Leave a Reply

Your email address will not be published.


*


This site uses Akismet to reduce spam. Learn how your comment data is processed.