Program Acura TSX 09 key with Autel MaxiSys Pro MS908P

Here is the instruction on Acura TSX 2009 key programming with Autel MaxiSys Pro MS908P diagnostic system and MaxiFlash Pro J2534 box. Work like a charm!

 

items needed:

The original Acura key

A spare key to be programmed

MaxiSys pro MS908P

Autel MaxiFlash Pro J2534 ECU programming tool

 

My procedure to program a new Acura key

The car starts

Connect Autel MS908P and Autel MaxiFlash Pro J2534 ECU Programming Device with the car

MaxiSys pro MS908P starts

Insert the spare key and original key separately to be ON

When insert the original key, select Acura on MS908P

Then USA

Then Start New Session

 

Select Diagnosis

Then Control Unit

Then IMMOBI (immobilizer)

Keep the ignition ON until the tester directs you to turn it OFF

Program keys with a T5 stamped on the blade of the key…

Diagnostic system initializing…

Select IMMOBILIZER SETUP

Establishing vehicle communications…

Select ADD AND DELETE KEYS

Establishing vehicle communications…

Then ADD KEY

Establishing vehicle communications…

Turn the ignition switch OFF

Turn the ignition switch ON with an original key

Turn the ignition switch OFF within 17 seconds

Turn the ignition switch ON with an new key within 20 seconds

Turn the ignition switch OFF within 17 seconds

Turn the ignition switch ON within 20 seconds without changing the key

Turn the ignition switch OFF

Turn the ignition switch ON

Is the immobilizer indicator light turned OFF?

Then check the immobilizer indicator light

 

Turn the ignition switch ON

The registration of keys has been completed.

Turn the ignition switch OFF

Then insert the key newly programmed to have a try and make sure that it works

Successfully programmed a Acura key with Autel MS908P and J2534 ECU programmer

This is from OBD Tools 365 Days Shop in Car Key Programmers technical support  Autel MaxiSys Pro MS908P program new key for Acura TSX 2009.

Be the first to comment

Leave a Reply

Your email address will not be published.


*