Launch X431 program Peugeot 408 2013 key

Share a key programming instruction with you all. Operation images from a Chinese customer who has managed to program Peugeot 408 new keys with original Launch X431 V (X431 pro). Program immobiliser key to Peugeot requesting for pin code.

lauch-x431-v-pro

Model:

Peugeot 408 2013, VIN= LDC943X48C13*****

 

Note:

– Prepare security code/pin code (usually under the spare key card, the last 4 letters after C9000000; if lost, ask the 4S store for help)

lauch x431 v pro-1

– No need a diagnostic tool when the high-frequency remote control synchronizes (key emission frequency is not the same), just press the scan tool and follow the screen instruction.

 

Operation to add new keys with Launch X431:

1 select Peugeot v42.92 or newer versions

2 select car-> 408-> 408(2010.01-2014.09)

3 select Diagnosis

4 select a system

5 select Embedded Systems Interface (BSI), then  communicate with ECU for about 15s

x431 pro add pug 408 key 1-2

6 the system prompt the menu will be different on different models

x431 pro add pug 408 key 2-3

7 select Special Function

x431 pro add pug 408 key 3-4

8 select Repair Kit

x431 pro add pug 408 key 4-5

9 select Learning

x431 pro add pug 408 key 5-6

10 Select Key Programming

x431 pro add pug 408 key 6-7

11 enter the security codes to continue

(wrong security codes will stop the process)

Note: all keys should be programmed together

x431 pro add pug 408 key 7-8

12 click OK and enter the pin code twice

x431 pro add pug 408 key 8-9

13 Confirm pin code. Ready to program keys.

x431 pro add pug 408 key 9-10

14 enter keys number (maxi:5)

Here, keys number: 2

x431 pro add pug 408 key 10-11

15 turn ignition off

16 turn ignition on within 15 seconds

x431 pro add pug 408 key 11-12

17 key programming success, and prompt that key programming complete, turn ignition off and take out the key

x431 pro add pug 408 key 13-13

18 quickly insert the second key to program

x431 pro add pug 408 key 14-14

19 turn ignition on within 15 seconds

x431 pro add pug 408 key 15-15

20 key programming success, and prompt that key programming complete, turn ignition off and take out the key

x431 pro add pug 408 key 16-16

21 click OK, and now programmed keys number: 2

x431 pro add pug 408 key 17-17

22 Check handbarke Is applied and gear shift in position “P” (automotive transmission)/gear shift in neutral position (manual transmission) before start the engine

x431 pro add pug 408 key 18-18

23 remote control programming, follow menu instruction step by step strictly

x431 pro add pug 408 key 19-19

24 remote control matching complete

x431 pro add pug 408 key 20-20

25 test the remote control and use the key to start the engine

remote control and new keys are verified working…Done!

Disconnect Launch X431 diagnostic system.

Related posts

Be the first to comment

Leave a Reply

Your email address will not be published.


*