Program Nissan Sentra 2007-2012 key by CK-100 key programmer

Here is the instruction on programming new key for U.S. made Nissan Sentra from 2007 to 2012 year NATS 5 models by using CK100 V45.02 CK-100 key programmer.

 

Note:

CK-100 V45.02 is new update to V45.09 which is verified to be working version as well as CK100 v45.06.

Nissan Pin Code is required when program new keys.

 

Instruction:

Connect CK-100 auto key programmer with vehicle via OBD socket

ck100-program-nissan-sentra-key-1
Check software and firmware information

ck100 program nissan sentra key 1-1

Check battery status

Password saved

ck100 program nissan sentra key 2-2

Select IMMOBILIZER function from Main Menu

ck100 program nissan sentra key 3-3
Select vehicle brand and region: Nissan USA
ck100 program nissan sentra key 4-4
Select vehicle model: Sentra (IK) 07-12

ck100 program nissan sentra key 5-5

CK100 will prompt how many token left

ck100 program nissan sentra key 6-6
Select the Nissan fuel type gasoline or diesel, here we choose gasoline

Insert a key and turn ignition ON

We note that the warning light stays signal indicating key is not programmed

ck100 program nissan sentra key 7-7

Select Nissan USA NAT system: NATS 5

ck100 program nissan sentra key 8-8

Select Program New Keys
Without pin code you cannot program new keys.

ck100 program nissan sentra key 9-9

Enter 4-digit pin code. You can pull out pin code by Nissan NSPC001 OBD2 pin code reader.

Turn ignition OFF
Insert keys to be programmed in sequence and turn them ON and OFF for 5 sec respectively.
In the end start the engine for some sec.
Press any key…

ck100 program nissan sentra key 10-10
Is the procedure successfully ended? press No

We select No to not spend tokens in ck-100

We note that the indicator was off indicating that the key has been programmed successfully.

Test the new key.

Rating
( No ratings yet )
Like this post? Please share to your friends: