Skip to content
Key Programmer

    Toyota TIS TechStream Program Immo Key on Tundra 2013

    japantoyota-key-programmer
    — (0)

    Customer Question:

    How to program new key with immobilizer chip on Toyota Tundra 2013?

     

    Engineer suggestion:

    Program new immo keys for Toyota by with Xhorse MIN VCI hardware and Tecshtream software is the best choice which will save you tons of money and time. Following is step-by-step guidance.

     

    Device used: 1. TIS Techstream MINI VCI Toyota OBDII Diagnostic Cable($26.99)

    1. New Keys

    TIS-TechStream-program-new-key-Toyota-Tundra-1

    Detailed procedure:

    Connect insert MINI VCI Cable into OBDII diagnostic socket

    TIS-TechStream-program-new-key-Toyota-Tundra-2

    Connect MINI VCI Cable with laptop

    TIS-TechStream-program-new-key-Toyota-Tundra-3

    Insert the new key and turn on switch ignition

    Click “connect to vehicle”

    TIS-TechStream-program-new-key-Toyota-Tundra-4

    Confirm the vehicle information and click NEXT

    TIS-TechStream-program-new-key-Toyota-Tundra-5

    Choose “immobilizer” option

    TIS-TechStream-program-new-key-Toyota-Tundra-6

    Choose “Utility”

    TIS-TechStream-program-new-key-Toyota-Tundra-7

    Choose “immobilizer key registration”

    Press next to proceed

    TIS-TechStream-program-new-key-Toyota-Tundra-8

    Follow the prompts to operate step1-3

    TIS-TechStream-program-new-key-Toyota-Tundra-9

    TIS-TechStream-program-new-key-Toyota-Tundra-10

    TIS-TechStream-program-new-key-Toyota-Tundra-11

    It is registering now…

    TIS-TechStream-program-new-key-Toyota-Tundra-12

    Done! Toyota Techstream Successfully program new key with immobilizer chip for Toyota Tundra 2013.

    Rate this article — (0)