Honda Civic 2004 chip48 generate remote with kd-900 and program chip by OBDSTAR X300 PRO3 key programmer, Good luck!
Part 1. Generate remote with KD900 remote maker
Part 2. Program chip 48 with OBDSTAR X300 PRO3 Key master
How to generate remote with KD900 remote generator?
Customer lost all remotes
Generate remote-> OUCG8D345HA
Connect circuit to cable and choose “Make Remote”
Then put the circuit into key shell and insert chip 48 in keyshell
How to register remote to car?
Insert the key and turn ON->press LOCK release-> then turn OFF 3 times until hear door cycle. Car afterthat press LOCK 1 time
How to program chip48 with OBDSTAR Key Master?
Use programmed key turn ignition on
Choose HONDA -> IMMOBILIZER -> AUTO -> 16PIN, press ENT to continue
Turn on ignition and press ENT
Initializing communication…
Is checking ** mode, please wait…
Determine the type of immobilizer system, please wait…
This car is 3rd generation, press ENT
Communication…
Choose Key -> ADD A KEY
Initializing communication…
– switch ignition off and turn on ignition with original key
– turn off ignition with within 15 seconds
– turn on ignition with a new key within 20 seconds
– turn off ignition
– turn on ignition switch without changing the key within 20 seconds
– switch ignition off
– turn on ignition
OBDSTAR X300 PRO3 will ask you if the immobilizer device indicator is off?
The indicator should be off now, press ENT and switch ignition off
Turn on ignition with original key
The key registration has been completed! Turn off ignition
Test the new key
Done! The security light go off when insert the new key!
www.autelsale.com