Skip to content
Key Programmer

    How to Program 2007 Cadillac Key Fob via GM Tech II

    gm-key-programmer
    — (0)

    This is an instruction on how to program key fob to 2007 Cadillac CTS-V using a GM Tech2 Tech II scanner.

     

    Model: 2007 Cadillac CTS-V

     

    The process…here you go…

     

    The key to be programmed

    How-to-program-key-fob-with-Tech-2-1

    Insert the key and ignition on

    How-to-program-key-fob-with-Tech-2-2

    The gm tech 2 scan tool power on

    How-to-program-key-fob-with-Tech-2-3

    How-to-program-key-fob-with-Tech-2-4

    In the main menu, go to Diagnostics

    How-to-program-key-fob-with-Tech-2-5

    Select model: 2007 Cadillac D (DN) CTS-V passenger car

    How-to-program-key-fob-with-Tech-2-6

    How-to-program-key-fob-with-Tech-2-7

    How-to-program-key-fob-with-Tech-2-8

    How-to-program-key-fob-with-Tech-2-9

    How-to-program-key-fob-with-Tech-2-10

    Then go to Vehicle Control Systems

    How-to-program-key-fob-with-Tech-2-11

    How-to-program-key-fob-with-Tech-2-12

    Read vehicle info

    Engine type: (U) 6.0L V8 LS2

    How-to-program-key-fob-with-Tech-2-13

    Go to Module Setup

    How-to-program-key-fob-with-Tech-2-14

    Then Remote control door lock receiver

    How-to-program-key-fob-with-Tech-2-15

    Program key fobs…

    How-to-program-key-fob-with-Tech-2-16

    Two key fobs to be programmed

    How-to-program-key-fob-with-Tech-2-17

    Tips of programming key fobs:

    All key fobs must be programmed each time any one fob is programmed. To program,press and hold the LOCK and UNLOCK key fob buttons prompted by the TECH 2. Programming takes 15-30 minutes….

    How-to-program-key-fob-with-Tech-2-18

    How-to-program-key-fob-with-Tech-2-19

    Programmed complete and test it’s working.

    Done!

    http://www.obdii365.com/producttags/gm-tech2.html

    How to Program Cadillac key fob with GM Tech2 clone

    Rate this article — (0)