Lonsdor K518ISE Program Bentley Flying Spur -2012 Smart Key

Lonsdor K518ISE Program Bentley Flying Spur -2012 Smart Key
Rate this post

Here’s the step-by-step guide on reading pin code and program smart key on  Bentley Flying Spur pre-2012 with Lonsdor K518ISE key programmer by OBD.


K518ISE Supported BENTLEY Vehicle List

Series Origin Year Fuel Type Function
Flying Spur Other 12- Other Key Programming
Mulsanne Other Other 6.8 Liter Key(Smart Key) Programming


Step 1: Read Pin Code

Connect K518ise host with vehicle via diagnostic socket

Select Immobilization->Bentley->Flying Spur->-2012->Immobilizer->Read pin code

Turn ignition to ON position

Reading pin code…

Verifying immobilizer

Trying to get pin code

Lonsdor K518 read Flying Spur ECU version, PIN and CS success

Write down the pin code


Step 2: Program Key

Select Learn Key

Turn ignition switch to ON


K518ISE display vehicle part number

Lonsdor K518ISE requires to enter PIN code to access

Enter pin code just read and confirm

Insert the key and switch ignition OFF, and remove the key from the ignition lock, then insert key and switch ignition on.


Identified number of programmed keys in car: 1

Enter key number to be programmed

Here we need to program 1 key

Turn the ignition to OFF position. Insert all keys in turn and turn ignition ON for at least 5 sec. When all keys are replaced, click OK to finish key learning.

Note: If the remote control can remotely control the vehicle, but cannot start car, the dashboard prompts IMMOBILIZER ADVANCED.


Program success

Be the first to comment

Leave a Reply

Your email address will not be published.


This site uses Akismet to reduce spam. Learn how your comment data is processed.