Skip to content
Key Programmer

    How to Clone 2014 Jeep Wrangler ID46 Chip Key with CN900 Mini

    chrysler-key-programmer
    — (0)

    Here’s guide to clone a chip key on Chrysler, Dodge, Jeep that requires sniffing aka snooping using the CN900 Mini or ND900 mini cloning machine. This particular vehicle is a 2014 Jeep Wrangler and used a Y159-SH with a CN3 chip inside.

     

    Procedure:

    cn900-mini-copy-dodge-46-chip-1

    Insert a original key into CN900 mini’s antenna

    Select Read & Copy function

    cn900-mini-copy-dodge-46-chip-2

    CN900mini identified chip type

    Click on DECODE button

    cn900-mini-copy-dodge-46-chip-3

    The original key ID: 5CCBE368

    Insert the original key into vehicle’s ignition switch, with the sniff-antenna close to it.

    Turn ignition on and then off, repeat 5 times

    cn900-mini-copy-dodge-46-chip-4

    cn900-mini-copy-dodge-46-chip-5

    Sniff data completed

    cn900-mini-copy-dodge-46-chip-6

    Insert original key into mini cn900‘s coil again

    cn900-mini-copy-dodge-46-chip-7

    Reading data.  Don’t remove the transponder.

    cn900-mini-copy-dodge-46-chip-8

    Decoding 46 chip.. wait until it process to 100%.

    Remove original key.

    cn900-mini-copy-dodge-46-chip-9

    Insert new key with CN3 chip inside

    Click on COPY button

    cn900-mini-copy-dodge-46-chip-10

    Clone Jeep ID46 chip key success

    cn900-mini-copy-dodge-46-chip-11

    Now you can start vehicle with the new key.

     

     

    http://www.obdii365.com/producttags/cn900-mini.html

     

    Rate this article — (0)