Program Ford Everest 2015 ID49 Remote with OBDSTAR X300 DP

Here’s little guide to program  HITAG-PRO(ID49) chip remote key on a Ford Everest year 2015 when all keys lost using OBDSTAR X300 DP/Key Master DP tablet key programmer via OBD.


			Program Ford Everest 2015 ID49 Remote with OBDSTAR X300 DP

Chip HITAG-PRO(ID49) Ford 2015+


			Program Ford Everest 2015 ID49 Remote with OBDSTAR X300 DP

At least 2 keys are required


			Program Ford Everest 2015 ID49 Remote with OBDSTAR X300 DP

Procedure:

Connect OBDSTAR X300 DP with vehicle via OBD diagnostic socket
Turn ignition to ON position
Select Ford/Lincoln V32.02->Ford->Immobilizer->Everest->2015->Type1->All keys lost


			Program Ford Everest 2015 ID49 Remote with OBDSTAR X300 DP


			Program Ford Everest 2015 ID49 Remote with OBDSTAR X300 DP


			Program Ford Everest 2015 ID49 Remote with OBDSTAR X300 DP


			Program Ford Everest 2015 ID49 Remote with OBDSTAR X300 DP

all keys will be erased, minimum 2 keys are required
Configuring system
Switch ignition off


			Program Ford Everest 2015 ID49 Remote with OBDSTAR X300 DP

Press Hazard light
Open and close driver door
Configuring system


			Program Ford Everest 2015 ID49 Remote with OBDSTAR X300 DP

1.Switch ignition off
2. Insert 1st key turn on 5sec
3.Insert 2nd key tun on 5sec


			Program Ford Everest 2015 ID49 Remote with OBDSTAR X300 DP

Test remote and start

Success.

www.obdii365.com

Rating
( No ratings yet )
Like this post? Please share to your friends: