How to Program Toyota Proximity All Keys Lost with Tango Emulators

How to: Toyota Proximity All Keys Lost programming using Tango emulators

Scorpio-LK Emulators with Toyota Maker software kit activations bundled into one for basic Tango transponder key programmer.

Tango Proximity Key emulator is a small PCB.


			How to Program Toyota Proximity All Keys Lost with Tango Emulators

There is a set of 5 emulators that match different proximity fob types.
The emulators are color coded to guide the end user.

A CR1620 battery is required.


			How to Program Toyota Proximity All Keys Lost with Tango Emulators

In order to use this new suite of products the current version of TangoPlus must be downloaded by the
end user from the Tango section of the Scorpio forum.
Board Index > Tango > FAQ > TangoPlus DOWNLOAD

How to install TangoPlus software?

Tango Plus Toyota v6.2+ Toyota Camry DST AES P1 88 Example

Hardware:  original Tango from Scorpio, some use genuine Tactrix Openport J2534 Pass-Thru)

clone openport does not work.

Here take  Tactrix OBD Port Interface as an example.

1. Select Tango Plus Toyota.


			How to Program Toyota Proximity All Keys Lost with Tango Emulators

Main user interface will shut down.
New Tango Plus user interface will open.

2. Click on settings in order to check the installed Pass-Thru device has been detected.
Click OK.
Click YES when prompted to save changes.


			How to Program Toyota Proximity All Keys Lost with Tango Emulators

3. Select Connect to Car
If a successful connection is achieved with the Smart ECU a pop up window indicating OK will display.
Note: Once connected the ECU Part Code may or may not display.


			How to Program Toyota Proximity All Keys Lost with Tango Emulators

4. Select Read Data from Car.
A progress bar will appear.
When reading data completes, the proximity key info will display together with the required emulator.


			How to Program Toyota Proximity All Keys Lost with Tango Emulators

5. Fit battery to the specified emulator
Place emulator over the antennae aperture of the Tango emulators  (battery side down).


			How to Program Toyota Proximity All Keys Lost with Tango Emulators

6. Select Write Emulator.
Click on specified emulator followed by OK


			How to Program Toyota Proximity All Keys Lost with Tango Emulators

Select Save File, it may be useful for repeat customer business, research and or comparison purposes.
7. Use emulator to program OEM fobs to the vehicle by way of Tango or similar.
The emulator will start the vehicle and therefore may be used to rescue the vehicle in an emergency situation.
8. To clear data from emulator for next time use, simply remove the battery.

www.obdii365.com

Toyota Proximity All Keys Lost Solution using Tango Emulators

Rating
( No ratings yet )
Like this post? Please share to your friends: