Here’s the step-by-step key programming procedure for Mini Cooper 2014 Cas3 with Autel MaxiIM IM608. Select IMMO->MINI->Auto Detect VIN-> Mini (Europe)->Smart Mode
IM608 will automatically scan the immobilizer system, engine system, transmission system
Press OK to continue Select Key Learning function
Autel IM608 read vehicle and ecu information
This is a MINI R56 CAS3 Confirm information and press OK to continue Going to generate dealer key
Add key and all keys lost are both available for current CAS
Key learning process requires network to obtain data. Enable WiFi connection.
Remove the key from the ignition switch. If it is a smart key, take the key out of the car.
Reading key information
Connect to internet to obtain data
Read key information success.
Backup original key data
Save key data
Press OK to continue
MaxiIM IM608 will key numbers and positions, select an available key position (i.e Key4) and press Programmer Generation Key
Choose key type, here Semi-smart key
Connect the IM608 to the XP400 programmer and put the new key into the XP400 programmer card slot
Writing key in process
Generate dealer key success
Insert the key into the ignition switch to start the car once.
If the vehicle cannot be started, or the ELV is displayed on the instrument, please synchronize the ELV or DME according to the situation
Program new smart key success.
Done.
www.obdii365.com
