Possible to Program Dodge RAM Key with Xtool X100 PAD on bench?

Test:  xtool x100 pad bench programming Dodge RAM immobilizer function

Result: Success !

Disclaimer:

The test was carried out by Mexican expert. You are at your risk.

Instructions:

set up bench connection

connect module with VCI module and x100 pad, connect another end to key lock EIS (with key inserted) and power supply

In X100 pad, select Immobilizer->Chrysler->Immobiliser/Fobik (WCM)->Auto detect

Auto detect Type 4

Select Read security code

Read pin code success

Then choose to program new key/old key and follow xtool x-100 pad prompts until success.

Done.