Program Mitsubishi Attrage 2016 Remote with OBDSTAR X300 DP Plus

Frequency 433MHz

1 original remote and 2 remote to be programmed

Go to Immobilizer->Mitsubishi->China->Select from vehicle->Mirage->with Smart->2015 up->Add remote

Turn on ignition switch
This function will erase all remotes, up to 4 remotes can be programmed

2 remotes has been programmed

Holding down the lock and unlock button at the same time, remote lights flash three times, then release button, wait for a second, press unlock button once again, if you want to
program other remotes, repeat the above operation (all operations must be completed within 10 seconds), press ESC to return.

Program 3 remotes completed

Test remote control

All working.

Done.