Autel IM608 Program W172 All Keys Lost in 7 mins

The fastest way to do W172 all keys lost using Autel MaxiIM IM608 tools: Step 1: EIS connection Step 2: password read Step 3: key file generation Step 4: key write in detail… Step 1: EIS connection Some tips for Mercedes all keys lost using G-BOX2

EIS types on Autel Im608

Here: W172 G-box2 connection for w172/w204/w207 all keys lost Notes: remove the eis from the vehicle, shown in the pic below, correctly connect the eis to the g-box, and then perform the all keys lost

p1: connect the power adapter p2: according to the eis wiring diagram, connect the eis to the hb15 harness

Step 2: password calculation Password calculation steps:

1. connect device, obd cable and obd connector on the wiring harness in sequence
2. connect the ir key simulator (apb102, apb103) to the programmer
3. insert the ir key simulator (apb102, apb103) into the eis and start collecting data
4. password calculation completed!

Warning: pls follow the instruction and don’t disconnect the relevant connection

Connect device, obd cable and obd connector on the wiring harness in sequence Note: ensure that the eis is disconnected from the steering column lock

Connect the ir key simulator (apb102, apb103) to the programmer

Collecting data calculating password

Insert the ir key simulator into the eis If it’s already inserted, remove and insert it again

Collecting data and calculating password is in progress Please wait The process will take 10-50 min (it takes longer for some vehicles) Pls ensure that the device and vehicle battery are stable and sufficient during the process

Succeed in computing password

Password calculation completed!

Step 3: key file generation Autel is gonna to generate key file

Select key number 6

Select v51 (half smart key)

Generating key file

Succeeded to generate key file

Step 4: key read and write Autel im608 will read and write key

it’s a ir key

Write BE key file

Please insert the third-party blank key into the infrared key hole on the XP400 programmer

Select key file

Communicating with the key

Key file writing completed!

Job’s done! 7min done! www.obdii365.com