Program Mitsubishi MIRAGE G4 2015 Key with Autel IM608

Vehicle Model: Mitsubishi MIRAGE G4 2015

Key type: smart key ID46 (Hitag2)


			Program Mitsubishi MIRAGE G4 2015 Key with Autel IM608

Problem:

ENGINE WON’T CRANK
ENGINE WON’T START


			Program Mitsubishi MIRAGE G4 2015 Key with Autel IM608


			Program Mitsubishi MIRAGE G4 2015 Key with Autel IM608

Solution:

Programming immobilizer system, two Smart keys

Tool to program: Autel MaxiIM IM608 and XP400


			Program Mitsubishi MIRAGE G4 2015 Key with Autel IM608

Procedure:


			Program Mitsubishi MIRAGE G4 2015 Key with Autel IM608

Select Immobilizer remote control learning-> Smart key learning function
At least one learned smart card is required.
Close all the doors and do not lock. Unplug all external devices on the cigarette lighter to prevent interference and voltage shortage.


			Program Mitsubishi MIRAGE G4 2015 Key with Autel IM608

Autel Im608 MIRAGE G4 Add Key 2

Insert a learned smart card into the key card slot.
The key card slot is near the bottom of the steering wheel, opt in the co-pilot storage compartment, if there is no card slot, close the key to the start button.
Turn the ignition on.
Turn the ignition off
Establishing vehicle communication


			Program Mitsubishi MIRAGE G4 2015 Key with Autel IM608

There is a problem with the key which was used for security info, check

Press Start button, car won’t start.


			Program Mitsubishi MIRAGE G4 2015 Key with Autel IM608

Insert smart key into card slot, long press the Start button.

Start car successfully.


			Program Mitsubishi MIRAGE G4 2015 Key with Autel IM608

Done.

www.obdii365.com

Rating
( No ratings yet )
Like this post? Please share to your friends: