Compared with the similar IMMO key programming and mileage programmers, Yanhua Mini acdp operation is much more user-friendly, therefore it also meet the needs of the newbies who has not rich chip welding skills and experience. For the details, please see below table.
|Yanhua Mini ACDP
|The Similar IMMO / ODO Programmer
|The mobile phone/PC is connected to the ACDP through WIFI to reduce the communication failure rate
|Need to use USB to connect with the computer, it is easy to cause a dead car due to poor USB port contact
|Support multi-platform system operation (IOS, Windows, Android)
|Only supports Windows operating system
|Read the data on the computer board through the dedicated probe interface without soldering (Even a newbie can do the job).
|Use a soldering iron to solder on the computer board. Poor soldering skill or leakage of the soldering iron can easily cause data loss or reading the computer to death.
|No need to disassemble the device or cut off the circuit of the computer board (a newbie can also complete various operations perfectly)
|To remove the components on the computer board or to cut off the circuit of the computer board, which may accidentally lose the components or break other circuits and make a dead car
|There is a pin detection function to detect whether the contact point is in good contact, to avoid data loss caused by poor contact.
|Without this function, it is unknown whether the wiring is reliable or not, which is easy to lose data due to virtual welding
|A variety of operation modes, including automatic mode and single-step mode, follow the operation guide to do.
|There is only a single single-step mode, and it is easy to make a dead stop for unskilled operation
|A variety of technical service platforms: with a dedicated technician exchange platform,if you encounter any problems in your work, you can directly consult on the technician platform, or you can use other social software for technical communication (such as QQ, WeChat, technical phone, etc.)
|Must use other social software for technical communication
|Professional technical after-sales team, end-users can directly contact the after-sales department of the manufacturer if you encounter problems, you can quickly and accurately solve various problems.
|If you have any questions, you can only consult the dealer, and the dealer will contact the manufacturer again.
|able to add multi function software license to the ACDP unit, i.e Porsche, JLR, Volvo etc. Don’t need to buy extra hardware.
|usually single purpose device, no able to add license to it
- Reading CAS4 with ACDP Mini (no soldering)
Reading CAS4 with other programmers (i.e vvdi prog), require soldering job
- Reading CAS3 with ACDP Mini, no soldering
Read CAS3 with other programmers, require soldering
- Reading DME module with Yanhua ACDP, no soldering
Read DME module by other devices (i.e ktag), require soldering, some require drill a hole
- Reading FRM module by Yanhua, no soldering
Read FRM module data by other devices (i.e xprog), need soldering
- Reading EGS module with ACDP, easy and no soldering
Read EGS by other devices, i.e CGDI BMW, need to solder follow the wiring diagram
- Renew remote key by ACDP Mini, no soldering
Renew/unlock remote by other programmers, require soldering job.
Yanhua Mini ACDP vs. Other IMMO / Odometer Programmers