Skip to content
Key Programmer

    Solved! Xhorse VVDI BIMTOOL PRO key programmer connection fail

    bmw-key-programmer
    — (0)

    If your Xhorse VVDI BIMTOOL PRO key programmer met issue like this : There was no connection with the car (either via CAN or KLINE bus) after to the newest software and firmware, No matter trying how many times in the vehicle and ‘on table’ , there is no data transferred on CAN/KLINE still.

    01 Fixed! Xhorse VVDI BIMTOOL PRO No Connection With The Car 02 Fixed! Xhorse VVDI BIMTOOL PRO No Connection With The Car

    Solution: You should short the component in the following printed circuit board with a zero-ohm resistor.

    03 Fixed! Xhorse VVDI BIMTOOL PRO No Connection With The Car

    https://www.obdii365.com/

    Rate this article — (0)