Car model and year:
A 2016 Skoda Yeti with keyless ignition ( IMMO4-kessy)
To add an aftermarket key ( xhorse )
Key Programmer to use:
Xhorse VVDI2 Key Programmer
The key didn’t work somehow, ( was not able to learn, 1-2 on dash)
Then I decided to teach only the original key back, proceeded VVDI2 says All keys learned successfully, yet on the dash still 0-1 shows.
Look at the images below:
How to solve this problem?
That happens because you did not finish key learn, and once you go into key learn – cluster show 0-2 for example, all keys are delete from immo – you can see that on the config that there is no key.
Xhorse VVDI2 tech support https://www.obdii365.com/.