Question: Does Autel im608/im508 have the id48 clone like xhorse tools?
Answer:
Yes OBD clone Id48 with xp200/xp400.
But only on few cars only you can “clone” id48 (golf 6…)
Only immo system 2005+, immo gen 3, 5 & 4 (No old immo gen. 2 & 3 )
but it still needs to read immo data.
Here is an example of VW Jetta 2008 ID48 key cloning with Autel im508 xp200.
Same with XP400 or XP400 Pro.
Walk thru of the great feature built into the Autel IM508 and IM608 for cloning VW megamos id48 transponder keys. Using the im508 you can clone a key ID to a new blank key saving time from pulling and decoding the PIN. Everything can be done in under 5 Minutes.
We have an ID48 chip key inserted into the xp200 programmer
Go to Immobilizer- Volkswagen- Smart Mode
Detect vehicle information
Read instruction and identify number of keys
Select Copy Megamos 48 key
3 steps to complete key cloning:
1). Read Immo data
2). Read and write key
3). Make dealer key
Insert start key and turn on ignition switch
It takes 1 minute to read immo data
Then select key ID to write key
Put a blank key in the xp200 programmer key hole and start making dealer key
Copy id48 key success
The key can start car
Done.
2008 Jetta Megamos ID48 copy using Autel IM508: Success!
