Skip to content
Key Programmer

    Where to Hold the Emergency Blades in Autel Smart Keys?

    Info
    — (0)

    Question:

    What is everyone using to hold the emergency blades in the Autel universal keys?

    Do the universal remotes have a space for an emergency key? Flip key?

    Where to Hold the Emergency Blades in Autel Smart Keys?

    Answer: It does have a space for an emergency key. Flip key is available soon.

    You can use superglue.

    You can also drill a hole and put a pin that’s all you’re using same xhorse blades.

    I tap a M3 hole and use a M3 x 4mm grub screw. Works good.

    User feedback:

    I got the key installation down to about 1 minute install. no glue needed. xhorse/keydiy. flip key blank 2.0×4 roll pin. 5/64 drill bit. drill the key blank thru the hole, takes just a few seconds to drill it, it’s easy. then slide key in and tap roll pin in and ur good to go. it is quicker then installing a roll pin in a flip remote. 5/64 drill bit is the perfect size. the roll pin was just a hair toilet tall, took Drexel 2 seconds to clean it up.

    Where to Hold the Emergency Blades in Autel Smart Keys?

    Where to Hold the Emergency Blades in Autel Smart Keys?

    https://www.obdii365.com/producttags/autel-km100.html

    Rate this article — (0)