Skip to content
Key Programmer

    Tips to Program Volkswagen Passat CC 2012 ID48 Key with Autel IM608

    Illustration for Tips to Program Volkswagen Passat CC 2012 ID48 Key with Autel IM608
    Vw Key Programmer
    — (0)

    Volkswagen Passat CC 2012 is done with Autel IM608 in Smart mode via obd.

    I programmed 3-4 of them with the 608. No problems, but you have to do it on the bench. Read eeprom and write key via dump ( make delete key then learn the key all on bench).

    You can pull CS and pin via eeprom. Make sure you get a good read of the eeprom, desolder it from the comfort module.

    Procedure:
    Read immo data.
    Make dealer key.
    Learn keys 2-2. Done.
    Car went in programming mode from an idiot Who don’t generate dealer key.
    He wants to add directly id48 on the car.
    I made by obd with autel without problem.
    Usually I clone it is safety way.
    When you have already 1 key . Akl is this mode.

    Autel Im608 Volkswagen Passat CC 2012 Add Key 1

    Autel Im608 Volkswagen Passat CC 2012 Add Key 2

    Rate this article — (0)