Skip to content
Key Programmer

    Autel KM100 Cannot be Charged and Turn on Solution

    universal-car-key-programmer
    — (0)

    Dead Autel km100 solution. If the battery is fully discharged and cannot be charged and turned on anymore, open km100, disconnect battery and attach power 4.2-4.4v directly to battery terminals + and -. Keep it for 10-15 min. Then assemble all together, connect Charger to usb-c and it will work again. I use Dc power adapter with output 4.2v 500ma.

    Autel Km100 Cannot Charge Battery 1

    Autel Km100 Cannot Charge Battery 2

    This must override the battery sense circuit.

    Since, the battery is fully discharged, the sensor cannot detect battery presense.

     

    Rate this article — (0)