How to Add Skoda Fabia 2019 MQB NEC35XX Key with Xtool X100 PAD3

Skoda Fabia 2019 with locked MQB NEC 35xx key programming successfully using xtool x100 pad3 via OBD.

Connect x100 pad3 with vehicle.

Select Skoda->Select by type->Immobilizer function->MQB immobilizer system->NEC35XX Dashboard ->2015 onwards

Reading immo data
It takes about 10 minutes

Read CS, VIN and key information

Save Immo data
Select Make dealer key

Connect KC501 or KC100 with X100 PAD3
Put a programmed key into KC501/KC100

Get key data

Put a new key into coil
Make dealer key success

Then Learn key
Turn on ignition switch
All keys need to be learned

Put key numbers to be learned: 2

Learn key 1 and 2.

Add key successfully.

Test both keys. It is working.

NOTE:  JCI is not supported yet. Choose Xhorse, Autel or Launch X431 device.

Launch X-prog3 Calculates MQB NEC35XX Sync Data for Free