Question:
Can Launch X431 IMMO Plus/IMMO Elite do VW Instrument immo key with pogo pin without reading from chip? Like say 2013 VW Jetta flip key. Autel can do it via Pogo pin and plug method and this can save some time.
Here is the clue.
This comes with a pogo pin. There is a pogo cable in the box when you get it.
This pogo cable connects to the xprog 3 yellow port (the DB26 connector).
User feedback:
It worked it out finally. This pogo cable does indeed connect to the xprog 3 yellow port. But doing so when connected to the car with old port powers up the instruments. So you need to find the pogo point, then touch and hold pogo on point while connecting to xprog3 the instrument should now enter service mode.
Hold the probe on the boot point, power on the cluster, you can then retrieve the immo data. After retrieval of immo data, put cluster back in car and turn ignition on before doing dealer key and learn key. Done successfully.
FYI:
Be careful when using pogo pin method. If you use the wrong pin it can cause corruption on clock.
