Skip to content
Key Programmer

    OBDSTAR G3 MQB48 MP001 Connection Failed Error Solution

    Illustration for OBDSTAR G3 MQB48 MP001 Connection Failed Error Solution
    Info
    — (0)

    Problem:

    Tried to read VW MQB48 cluster data for all keys lost using OBDSTAR X300 Classic G3 and C4-06 adapter. After setting up the connection as in the diagram, it says MP001 connection failed. Any solution?

    OBDSTAR G3 MQB48 MP001 Connection Failed Error Solution

    OBDSTAR G3 MQB48 MP001 Connection Failed Error Solution

    OBDSTAR G3 MQB48 MP001 Connection Failed Error Solution

    OBDSTAR G3 MQB48 MP001 Connection Failed Error Solution

    OBDSTAR G3 MQB48 MP001 Connection Failed Error Solution

    OBDSTAR G3 MQB48 MP001 Connection Failed Error Solution

    OBDSTAR G3 MQB48 MP001 Connection Failed Error Solution

    Solution:

    Reset MP001.

    Solved. Reset device.

    NOTE: 

    Some users said you must connect the 12V charger directly to the MP001, not the OBD2 cable. This is not correct.

    OBDSTAR engineer confirmed you can connect a 12V charger to either MP001 or OBD2 cable. Both work fine.

    OBDSTAR G3 MQB48 MP001 Connection Failed Error Solution

    Rate this article — (0)