Skip to content
Key Programmer

    Autel IM608 Adds MQB48 Key Cloning using AT100 Function

    Illustration for Autel IM608 Adds MQB48 Key Cloning using AT100 Function
    Vw Key Programmer
    — (0)

    Autel MaxiIM IM508S/IM608 II series released new VAG immobilizer software in October 2026.

     

    VAG IMMO V2.90

    Update Log:

    Adds All Keys Lost Mode function for MQB instrument cluster.

    Adds Modify Key ID function for IMMO IV ID48 transponder.

    Adds Modify Key ID function and Universal Key Generation function and optimizes process for Make Dealer Key function for MQB48 instrument cluster.

    Adds Modify Key ID function and Universal Key Generation function and optimizes process for Make Dealer Key function for MQB 5C key.

    Adds transmission control unit replacement function for MQB.

    Adds MQB48 Key Cloning (AT100) function.

    Optimizes Make Dealer Key function (with synchronization data saving and loading now included) for MQB instrument cluster and IMMO V.

    Optimizes IMMO data reading (via dump) and decoding (with key ID now included) for 2 models equipped with IMMO IV (Jetta and Santana).

    Optimizes Manual Selection mode and Smart Selection mode (with MQB instrument cluster and 5C/5D key now added).

    Autel Im608 Modify Mqb49 5c Mqb48 5a

    Autel Im608 Modify Mqb49 5c Key Id

    Autel Im608 Modify Mqb48 5a Key Id

    Autel MaxiIM VAG MQB48/MQB49 Function competitive advantages:

    • Modify key ID to leave original with online ODIS in 5A and 5C.
    • RH850 5A board change
    • Used ELV programming 5Q0
    • Reading RH850 5A board without removing capacitors or lift pn.
    • Calculator for synchrony mqb2
    • …Autel Im608 Modify Mqb49 5c Mqb48 5a
    Rate this article — (0)