Xtool X100 PAD2 Battery Drains and Power off Working Solution

Problem:

Hi, i recently purchased the Xtool x100 pad2 tablet key programmer and i love it. But i think i have a battery problem. I left it fully charged and 1 day later i tried to use it and it was dead. I also noticed that the battery drains very quickly when in use, from 100% to 60% in about 15mins. What can i do about this?  Is it possible for you to fix or replace it?

Final Solution to Xtool X100 PAD II Battery Drains and Power off problem from Xtooltech engineer:

Tools required:

1pc* Static bracelet

1pc* Hot air gun  (350±10℃ Temperature setup: 350±10℃)

Precautions: Please wear the static bracelet before each operation.

Procedure 1:  Change C6 capacitor

Position: C6

Name: Chip capacitor

Chip specification: 4.7UF/10V  0603

1.Disassemble the C6 capacitor and desolder a 4.7K 0603 resistor.

Procedure 2: Remove transistor

Position: Q14

Name: S8050

Chip specification:  0.1uF/50V 0402

1.Disassemble the Q14 transistor.

Procedure 3: Change C123 capacitor

Position: C123

Name: Chip capacitors

Chip specification:  0.1uF/50V 0402

1.Replace the C123 capacitor witth a 3.3K%5  0402 resistor.