Lonsdor K518ISE key programmer is made by Lonsdor company which made Chinese version K518, CI600 Plus (SKP1000) and CI300. K518ISE has some surprises and new vehicle coverage, including a few volvos, cars Toyota/Lexus smart key all key lost via OBD, newer Renault, Maserati, Ferrari and many other makes.
Pre-order Price: $1199 (will be available in the end of Oct. 2017)
Main Function of Lonsdor K518ISE:
Immobilization Key Programming
Odometer adjustment/mileage correction
Built-in-in Volkswagen 4th & 5th adapter
Free BMW FEM key programming
Built-in Chip & remote detection module.
Lonsdor K518 Main Features:
The best car diagnostic tool based on Android
WIFI networking ensures software upgrading more convenient.
No need to plug memory card, or connect the computer with data cable, more flexible in online upgrading, updating and activating.
With USB-B2.0 standard connector, OBD-II test cable integrated with the diagnostic connector function of the adapter.
7 inches high brightness, high definition color IPS capacitive screen
3800mAh polymer battery
Support external memory expansion, better within 32G
Lonsdor K518ISE Key programmer Special Features:
Volvo (S40, S60, S80, XC60, XC90, C30, C70, V40, V60, V70) key programming.
Toyota/Lexus: smart key all key lost – via OBD ( without dismantle)
BMW CAS3/CAS3+/CAS3++: direct OBD programming
BMW CAS4/CAS4+: dismantle & read data programming
2016 -New Maserati: smart key programming
2016 -New Ford: smart key programming
Hyundai / Kia 46/47/8A smart key: PIN code reading via OBD, all key lost included.
Renault ( Megane, Koleos, Scenic) without PIN code key programming
VAG group 4th & 5th immobilizer system
Ferrari (458, F12, F149): direct OBD programming
Peugeot /Citroen: two ways to read PIN code & programming, all keys lost included.
Lonsdor K518ISE Key Programmer User Manual
Lonsdor K518ISE Basic Information
Lonsdor K518 ISE Immobilizer Car List:
Audi, BMW, Benz, VW, Volvo, Citroen, Ferrari, Maserati, Fiat, Lamborghini, Jaguar, MG,
Land Rover, Bentley, Lancia, Opel, Peugeot, Porsche, DS, Renault, Alfa Romeo, Smart,
Cadillac, Chevrolet, Dodge, GMC, Buick, Hummer, Ford, JEEP, Lincoln, Mercury
Honda, Hyundai, Isuzu, KIA, Lexus, Mazda, Mitsubishi, Nissan, Ssangyong, Subaru, Suzuki,
Toyota, Shigaoka Queen
Iveco, Trumpchi, BYD, Geely, Chery, Great Wall, Young Lotus (Basically all Chinese car
models are included)
Odometer Correction Car List:
VW, Porsche, Ford, Jaguar, Land Rover, Mazda, Audi, Renault, Hummer, Hyundai, Kia…
Note: more high-end cars will be updated very soon.
Lonsdor K518 ISE key programmer work with the smart key emulator as below, need purchase alone:
SKE-LT: Smart Key emulator – Toyota/Lexus smart key for all key lost via OBD
Black: SKE-LT-DST40(94/D4) -Supports 94/D4 smart key.
Red: SKE-LT-8A(88/A8)-Support 88/A8 smart key.
Green: SKE-LT-DST80(98)-Supports 98 smart key.
Blue: SKE-LT-8A(A9)-Supports A9 smart key.
Lonsdor K518ISE Technical Parameter:
RFID: Support 125KHz ASK,134.2KHz FSK
CPU: ARM Cortex-A7 Quad-core Processor Speed 1.34GHz
Display: 1024*600,7 inch IPS capacitive
Memory: eMMC 8G RAM 1G
Battery Capacity: 3800 mAh
Power Supply: DC12V 1A
Power port: 5.5×2.1mm
OBD Port: OBD-II
Comm Port: USB 2.0-type B
OBDII Protocols: ISO15765,ISO9141,ISO14230,SAEJ1850,VW TP1.6 TP2.0 etc
KPROG: Support programming MCU and EEPROM on ECU circuit board.
WIFI Communication Distance: 10m
Lonsdor K518 ISE Registration & activation
After system updating, you need go to registration&activation.
For new user, click Registration, input user name(email), name(min 2 char), password(min 6 char), email verification code and click YES to complete registration(if interrupted after registration is done, you will go to the System update–Registered user to proceed). Then go to Activation confirmation to continue.
After confirming activation, it will enter into Setup password interface, please set 6-digit numbers as your startup password. Then after information verification by Lonsdor (5-30 minutes, you can check the progress by clicking “Refresh” ), you will required to re-enter the password to verify, when you get the notification that verification successful, the whole process before using the device is complete.
1. User name must be available email address, so that you can receive the verification code
from Lonsdor by email.
2. Please pay attention to the difference between the registration password (min 6 char) and the startup password(6-digit), the former will generally only used when registration, so please commit the 6-digit startup password into memory, as this will be required every time when you start the device.
3. The account will be bound to the corresponding device for life, other accounts can not log in your device and your account can not log in an registered or activated device either. 4. An account can be used to bind multiple new devices.
How to Update Lonsdor K518ISE Key Programmer?
After networking, the system will automatically updated to the latest version. There are 3 ways of system update:
One key update: quickly update the new added or modified functions.
APK update: this is used when the APK is updated.
Force to update: this is used when the device is faulty or to retrieve data.
Lonsdor K518ISE Key Programmer User Manual English