How to use Lonsdor K518ISE to Program Ferrari 458 Remote by OBD

Lonsdor K518ISE key programmer is able to program remote key on Ferrari 458, F12 and F149 currently. Here’s the guide on programming Ferrari 458 remote with K518.

Procedure:

Step 1: Backup immo data

Step 2: Program key

Step 3: Program remote

Step 1: Backup Immo Data
Connect K518ISE host with vehicle via diagnostic socket
Select Immobilzation->Ferrari->458->Immobilizer->

Select Backup Immo Data function

Turn ignition ON
Communicating
K518ISE will show hardware and software information

Turn ignition OFF
Reading immo data, wait for 6 minutes

Lonsdor K518ISE will read Ferrari 458 pin code and key security data after 6 minutes
write down the pin code

save immo data as bin format

Backup success

Step 2: Program Key

Select Program Key function

The original working key also need to program.
New key to program must be a customized or a pre-written key

Turn ignition ON
Lonsdor K518 then will require to enter PIN code to access
Enter 5-digit pin code and confirm

Number of keys programmed: 1
Press YES to program next key or press NO to go back

Program key complete

Step 3: Program Remote
Select Program Remote function

Turn ignition ON
Again enter PIN code here

Hold remote key to be programmed in hand
Click OK
Click on remote control for 3 sec within 15 sec
press any button on remote key for 3 sec

Number of remote control programmed: 1
Press YES to program next remote

Program remote complete.

http://lonsdor-k518ise.blogspot.com/