How to use Lonsdor K518ISE to Program Ferrari 458 Remote by OBD

October 21, 2017 Andrew Petrov universal-car-key-programmer

— (0)

Lonsdor K518ISE key programmer is able to program remote key on Ferrari 458, F12 and F149 currently. Here’s the guide on programming Ferrari 458 remote with K518.

Procedure:

Step 1: Backup immo data

Step 2: Program key

Step 3: Program remote

Step 1: Backup Immo Data
Connect K518ISE host with vehicle via diagnostic socket
Select Immobilzation->Ferrari->458->Immobilizer->

Select Backup Immo Data function

Turn ignition ON
Communicating
K518ISE will show hardware and software information

Turn ignition OFF
Reading immo data, wait for 6 minutes

Lonsdor K518ISE will read Ferrari 458 pin code and key security data after 6 minutes
write down the pin code

save immo data as bin format

Backup success

Step 2: Program Key

Select Program Key function

The original working key also need to program.
New key to program must be a customized or a pre-written key

Turn ignition ON
Lonsdor K518 then will require to enter PIN code to access
Enter 5-digit pin code and confirm

Number of keys programmed: 1
Press YES to program next key or press NO to go back

Program key complete

Step 3: Program Remote
Select Program Remote function

Turn ignition ON
Again enter PIN code here

Hold remote key to be programmed in hand
Click OK
Click on remote control for 3 sec within 15 sec
press any button on remote key for 3 sec

Number of remote control programmed: 1
Press YES to program next remote

Program remote complete.

http://lonsdor-k518ise.blogspot.com/

Rate this article — (0)