How to Add BMW F-series F01 2010 Key with Lonsdor K518ISE

Model: BMW 7-series F01 2010

IMMO Type:  CAS4 1L15Y

Remote frequency: 868MHz

Tools used: 1 original key and a new key, remote unlocker, xhorse vvdi prog and Lonsdor k518ISE key programmer

 

 

Step 1: Renew Remote Key

unlock/renew BMW remote key PCF7953 using vvdi key tool or other remote unlocker

 

 

 

Step 2: Read CAS4 Dump with VVDI Prog

Follow VVDI-Prog wiring diagram to connect cas4 and computer

 

Read and save CAS4 1L15Y dump data

Step 3: Add key with Lonsdor K518

Select Immobilizer->BMW->Select from type->CAS4/CAS4+ ->Make ignition key

Copy and paste CAS4 D-flash/EEPROM to Lonsdor “customfile” folder

Select D-flash data

Read VIN

Select a key position to add

Put the key to be generated to K518 card slot

Generate ignition key success.

Follow steps below to program remote control:

 

Program remote key success.

Reinstall CAS4 module

Close the new key to ignition and press Start button to sync key

Test remote control and start engine.

 

 

 

 

Done.

Http://www.obdii365.com/producttags/lonsdor-k518ise.html

Http://www.lonsdor.org/lonsdor-k518ise-adds-bmw-7-series-f01-2010-cas4-remote-key/

• lonsdor-k518
• lonsdor-k518ise
• xhorse-vvdi-prog