How to Program VOLVO XC60 2014 Spare Key with Lonsdor K518ISE?
—
(0)
New customer feedback: VOLVO XC60 2014 Spare Key (semi-smart key) well done with Lonsdor K518S key programmer.
Q: How long does it require?
A: Takes less than half an hour.
Q: From where did you get the security data? It require to dismantle something to read it?
A: on the table read CEM with RN-01 PCB dongle takes around 2 mins, after go to the car and program.
Q: Can I do all keys lost?
A: Yes. same job.
Procedure & Photo attached:
Turn on ignition switch
In Lonsor K518, select Immobilizer->Volvo->XC60-> 2009 up->Smart key->Add Key
Select security data (read before operation)
Press Start button
Read vehicle information, part number, VIN etc
Identify current number of keys: 1
Insert new key to be programmed to car slot
Communicating
Key programmed success
Here’s the step-by-step procedure on Volvo XC60 key programming with Lonsdor k518ISE.
Rate this article
—
(0)