There’s hardly any OBD tool that will program all keys lost for Jaguar. The new SKP1000 key programmer will do. Here is the demo example on programming Jaguar S-type remote key when all keys lost via OBD.
(Note: The document is in Chinese, SKP1000 supports both Chinese and English.)
-
Program chip key
Select Immobilizer system 3
(Check above SKP1000 available Jaguar models, Immo system 1, Immo system 2,Immo system 3, F-type 2014 up, XF smart card (X250),XJ smart card 2013 up, XF smart card pre-2012, XJ smart card pre-2012).
Select Immobilizer
Select OBDII connector
Turn ignition switch to ON position
Press Yes to continue
Turn ignition OFF then turn it ON
Press Yes to continue
Current key number: 2
Turn ignition OFF and turn it ON
Press YES to continue
Select All keys lost (always select this option in case add key or program all keys lost)
All keys lost requires at leased 2 remote keys, otherwise will fail to program
Click on YES to continue
Change next key and turn ignition to ON
Press YES to continue
Insert first key into slot, turn ignition ON for 2 seconds
Insert second key, turn ignition ON for 2 seconds
press YES to continue
Follow procedure above (insert key and IGN ON fro 2 seconds) if you need program more keys
Click NO to go back
Check if the immobilizer indicator (red) flashes
2. Program remote
Select Automatic
Select Remote control system
Select OBDII connector
Turn ignition to ON position
Press YES to continue
Select Delete remote
Turn ignition OFF
All remote control have been deleted, press YES to continue
Delete success
Turn ignition OFF
Maximum 4 keys is able to be programmed
Press YES to continue
Press on the first remote
SKP-1000 shows first remote key ID
Press YES to continue
Press on the second remote
SKP1000 tablet car key programmer displays second remote key ID
Program remote success.
Press NO to go back
Test the new remotes.
Done!
Related post: