Guide to unlock and program smart key on a 2016 Toyota Land Cruiser VXR V8 5.7 4×4.
The solution was provided by a Chinese locksmith A Jie.
Problem:
A customer bought the Toyota VXR V8 5.7 in Aug, 2016. When came back home he found one of keys did not working, could not start he vehicle. He came me for help.
Diagnose:
Check the key frequency and chip type with ND900 key copy machine. It showed key’s programmed, so the smart key is okay.
Analysis:
1. The smart key has been programmed but not been learned
2. 4S store gave you the wrong key
How to check:
Method 1:
Program/learn the smart key by using SKP1000 tablet car key programmer. Unfortunately, skp-1000 failed to learn key. So the smart key is not correct key for this vehicle. Go and check method 2.
Method 2:
Step 1: Unlock Smart key
Unlock smart key with Xhorse VVDI2 key programmer or ND900 Mini
Perform Blank Check, key indicator will flash within 5 seconds if VVDI2 unlock success
Again use ND900 to check the unlocked smart key.
It shows not been programmed
Unlock smart key done.
Step 2: Add/Program smart key
Connect SKP1000 key programmer with vehicle via OBD socket
Select Immobilizer function- >select Toyota->Smart key CANBUS-> Smart key system
Choose OBDII connector
Turn ignition ON
Press YES to continue
Press the Start button
Put the registered smart card into coil.
If hear bee sounds, take away the smart card
Select Add smart key
the working key is close to the emergency starting induction antenna
Change a new smart key and put it into the coil
Press YES to continue
the new smart key is close to the emergency starting induction antenna
Configuring…
Program/Add smart key success
Test the new smart key.
