Key Programmer — 116

OBDSTAR X300 DP Plus Kills Nissan Qashqai 2015 BCM??

Problem: My client asked to add a new key to his Nissan qashqai 2015. I followed the OBDSTAR X300 DP Plus operation, everything is OK. I touched the
August 7, 2020
How to Program Grande Punto 2007 All Keys Lost?

Question: It has been very long time since I programmed Fiat Gande Punto all keys lost, usually for remote key you need to pre-code the remote and programme key
August 5, 2020
How to Program Grande Punto 2007 All Keys Lost?

Question: It has been very long time since I programmed Fiat Gande Punto all keys lost, usually for remote key you need to pre-code the remote and
August 5, 2020
Xtool Updated GM 2018- Password Reading in July 2020

Xtool tech programmers (xtool x100 pad2, x100 pad3, autopropad, ps90 etc) updated GM security password reading models after 2018 in July 2020. GM Key
August 4, 2020
Xtool Updated GM 2018- Password Reading in July 2020

Xtool tech programmers (xtool x100 pad2, x100 pad3, autopropad, ps90 etc) updated GM security password reading models after 2018 in July 2020. GM Key
August 4, 2020
CG Pro 9S12 “No Found Key” Error Solution

Here’s the engineer solution to CG pro 9s12 programmer can not detect the key chip and shows error “No found key”. 1, First remove the cover with
August 3, 2020
Xtool X100 PAD3 Program Dodge Charger 2011- Proximity in 5 Minutes

How-to: add a spare Dodge Charger (2011-) proximity smart key with xtool x100 pad3 in less than 5 minutes including pull pin code. Connect xtool pad3 with
July 31, 2020
Xtool X100 PAD3 Program Dodge Charger 2011- Proximity in 5 Minutes

How-to: add a spare Dodge Charger (2011-) proximity smart key with xtool x100 pad3 in less than 5 minutes including pull pin code. Connect xtool pad3 with
July 31, 2020
Xtool KC501 Adds Mercedes Infrared Key Function List

The Xtool KC501 chip and key programmer adds Mercedes Benz Infrared key function list on July 30th, 2020. Supports following Mercedes IR key programming:
July 30, 2020
Read 2011 Alfa Romeo Giulietta Pin Code with OBDSTAR or Xtool?

Question: Hi all, I have a 2011 Alfa Romeo Giulietta car to do,. You reckon the xtool x100 pad2 can handle and pull the PIN code etc? Suggestion: Xtool
July 29, 2020
How to use CGDI BMW Data Repair Function?

Device: CGDI Prog BMW key programmer Function: BMW Data repair Explanation: Supports modifying ISN, VIN and frequency in the CAS data Supports modifying
July 27, 2020
Xtool KS-01 Emulator vs. VVDI Toyota 8A AKL Adapter

Question: Who can tell me what is the difference between this two tools xtool ks-01 emulator and vvdi toyota 8a adapter, I don’t understand the
July 22, 2020
Xtool KC100 vs. KC501 Adapter

Xtool KC501 Key & Chip programmer, working together with Xtool tablets, is an upgrade version of KC100 IMMO adapter. The following parts are about
July 21, 2020
Program BMW EWS2 EWS3 EWS4 Key with Xtool X100 PAD2

Xtool supports BMW EWS2 EWS3 EWS4 all keys lost and add key, but not by OBD2. You need to read D-FLASH/EEPROM data first. Device required: Xtool x100 pad2/ x100
July 20, 2020
Program BMW EWS2 EWS3 EWS4 Key with Xtool X100 PAD2

Xtool supports BMW EWS2 EWS3 EWS4 all keys lost and add key, but not by OBD2. You need to read D-FLASH/EEPROM data first. Device required: Xtool x100
July 20, 2020
What Makes Yanhua Mini ACDP Better than Other Programmers?

Compared with the similar IMMO key programming and mileage programmers, Yanhua Mini acdp operation is much more user-friendly, therefore it also meet the needs
July 15, 2020
What Makes Yanhua Mini ACDP Better than Other Programmers?

Compared with the similar IMMO key programming and mileage programmers, Yanhua Mini acdp operation is much more user-friendly, therefore it also meet the
July 15, 2020
Program Audi Q5 5th IMMO Key with Xtool X100 PAD2

How-to: program Audi Q5 5th generation immobilizer key using Xtool X100 PAD2 via OBD. Both add key and all keys lost are available. Here’s the guide
July 13, 2020
Autel MaxiIM IM608 BMW FEM BDC Function List

One Customer’s 2014 bmw 428i with Fem module lost keys, I’m using Autel MaxiIM IM608 key programmer, I got the Fem module unlock and made key. The only
July 10, 2020
OBDSTAR Read GMC 2017 Denali PIN Code and Program Smart Key

Test feedback: GMC 2017 Denali. 4-digit PIN Code reading and smart key programming on OBDSTAR X300 DP PLUS. Generate remote with xhorse remote and remote maker.
July 9, 2020